Socomec Auto Changeover Switch ATyS dS (40Amp - 125Amp)

Socomec ATyS dS remotely operated transfer switches, rated 40–125 A, for use with a compatible controller.

Manufacturer / range: Socomec
Category: Automatic transfer switches

We’ll confirm the model, specifications and installation scope for your requirement.

Product overview

ATyS d S

REMOTELY OPERATED TRANSFER SWITCHING EQUIPMENT WITH DOUBLE 230VAC POWER SUPPLY - FROM 40 TO 125 A

Robust industrial RTSE with emergency handle compatible with any Transfer Switch Controller

Automatic transfer switching equipment (ATSE) that monitors the availability of electrical power and automatically transfers the source, by actuating a genset, for example. ATSE complies with international standard IEC 60947-6-1.

ATyS d S products are 4 pole remotely operated transfer switches with positive break indication.
They enable the on-load transfer of two three-phase supplies via remote volt-free contacts, from either an external automatic controller, using pulse logic, or a switch.
They are intended for use in low voltage power supply systems where a brief interruption of the load supply is acceptable during transfer.

Conformity to standards

IEC 60947-6-1
IEC 60947-3
GB/T 14048.11

Technical specifications

Review the listed range details and brochure. Confirm your exact model and duty with our team.

Advantages

ATyS d S: Dual power supply

In addition to the functions offered by the ATyS S, the ATyS d S incorporates supply redundancy without the need for additional wiring. This is obtained by integrating a double supply (2 independent supplies) directly within the product.

Safety and reliability

ATyS d S products use stable position technology, ensuring constant pressure on the contacts and preventing premature faults.
In addition, they do not require a power supply to maintain position, thus protecting their loads from voltage fluctuations.

Easy integration

ATyS d S products can be easily installed inside enclosures. Their design, and in particular their compact size, enables integration within most 200 mm deep enclosures.

Simplified maintenance

Maintenance can be carried out easily under load, with manual operation still available.
The control and motorisation section can be replaced simply by removing 4 screws, with no work required on the installation cabling.

Need a price or product advice?

Call our Jaipur office or share your product, capacity and site location.

+91 9001006655

Socomec Auto Changeover Switch ATyS dS (40Amp - 125Amp)

Product overview